EN 353 Steel Sheet and Plates
Your source for EN 353 Steel Sheet and Plates, Manufacturer and Supplier of the most qualitative range of EN 353 Steel Sheet and Plates
Look for EN 353 Steel Sheet and Plates at best price across industry.
Grand Metal Corporation is acknowledged as a manufacturer, exporter & suppliers of EN 353 Steel Sheet and Plates, available in a variety or grades, materials, and finishes, in metric and inch sizes. We have a full inventory. steel has carbon content of 0.17% and the most common form of steel as it's provides material properties that are acceptable for many automobile applications such as heavy duty gear, shaft, pinion, cam shafts, gudgeoned pins [1,8]. It is neither externally brittle nor ductile due to its lower carbon content and lower hardness. As the carbon content increases, the metal becomes harder and stronger. In order to ensure the material of the specimen is done with help of the optical emission spectroscope (OES). The result is obtaining from the chemical analysis, carbon – 0.171 %, silicon – 0.3 %, manganese – 0.56 %, phosphorus – 0.012 %, sulphur – 0.13 %, Chromium – 0.953 %, Nickel – 0.989 %, molybdenum – 0.16 % and remaining percentage is iron respectively. A sample of ϕ 30 × 10 mm is polished using 60 grit papers and two sparks is introduced on the surface to find the chemical composition of the material. After ensuring the chemical composition, the raw material is machined according to the dimension for various tests
Grand Metal Corporation carries a variety of EN 353 Steel Sheet and Plates and supply EN 353 Steel Sheet and Plates at Best suitable price.
Useful Information of EN 353 Steel Sheet and Plates
Features
| Chemical composition |
| Grade |
Min |
Max |
| Carbon, C |
-.-- |
0.20% |
| Manganese, Mn |
0.5 |
1.00% |
| Silicon, Si |
-.-- |
0.35% |
| Nickel, Ni |
1 |
1.50% |
| Molybdenum, Mo |
0.08 |
0.15% |
| Chromium,Cr |
0.75 |
1.25% |
| Sulfur, S |
-.-- |
0.05% |
| Phosphorous, P |
-.-- |
0.05% |
Mechanical Properties
| Mechanical Properties |
| Hardening |
840-870 |
| Queching |
oil |
| Tempering |
150-200 |
| Brinell Rockwell Hardness |
150-200 |
Other Details of Property
| Annealed |
R |
S |
T |
U |
V |
W |
Y |
|
| Ruling Section (mm) |
150 |
150 |
100 |
65 |
65 |
30 |
30 |
25 |
| Tensile Strength (MPa) |
680/720 |
690/850 |
770/930 |
850/1000 |
930/1080 |
1000/1160 |
1080/1240 |
1280 |
| Yield Stress (MPa) |
440/480 |
480 |
570 |
665 |
740 |
835 |
895 |
1050 |
| Elongation (% Min) |
22 |
15 |
15 |
13 |
12 |
12 |
10 |
10 |
| ISO V Impact (Joule) |
30 |
30 |
30 |
30 |
25 |
25 |
22 |
7 |
| Hardness (Brinell) |
190/210 |
201/255 |
223/277 |
248/302 |
269/321 |
293/341 |
311/375 |
363/415 |
| Proof Stress (0.2%) if required (MPa, Min) |
|
495 |
550 |
630 |
710 |
770 |
850 |
985 |
Applications
Utilised when higher than carbon steel mechanical properties are required
Commonly used for axles, drive shafts, crankshaft connecting rods, high tensile bolts, studs, propeller shaft joints, rifle barrels, and induction hardened pins
Bolt specification: 9.8 (in condition "T")
Bolt specification: 10.9 (in condition "U")
Comparable Specifications
Din 42CrMo4
SAE 4240
Deutsche W/No 1.7225
Euro Norm EN 10083-1 (1991) 970 Part 1; 42CrMo4
BS970 Part 1 1983, 709M40
BS970 of 1955 EN19
Contact Grand Metal Corporation today for a best offer & competitive quotation…
Call: +91 98927 02393, 97690 58811
Email:
[email protected]
