-
Call Us: +91 9769058811 / 9892702393
[email protected]
Call Us: +91 9769058811 / 9892702393
[email protected]
| SS 501 HT Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
| Standard: | DIN 933, DIN 931, ANSI, JIS standards |
| AL6XN Fasteners In Form of: | Hex |
| Square | |
| Round | |
| Threading as per Gauge Etc. | |
| Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
| SS 501 HT Packing: | IN BULK :canton/pallet, Small Boxs/carton/ pallet, or customer request |
| SS 501 HT Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
| Property Class: | For Bolts & Screws: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts: A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 | |
| For SHCS: F837B, F837C, F837E, F837 | |
| For Threaded Rods: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 | |
| SS 501 HT Finish: | Passivated |
| SS 501 HT Origin and service-region: | European |
| Origin of 304 Stainless Steel Nuts are Western European. However projects with eastern origin are possible on request. | |
| Stainless Steel Grades: | AISI 304, AISI 304L, AISI 316, AISI 316L, AISI 309, AISI 310, AISI 317L, AISI 321, AISI 317, AISI 309, AISI 410, AISI 422, AISI 430, AISI 431, AISI 303 , AISI 202 fasteners Etc. |
| Surface Coating: | Hot Dipped Galvanizing Fasteners |
| Phosphate Fasteners | |
| Teflon Fasteners | |
| Ptfe Coated Fasteners | |
| Xylon Fasteners | |
| Zinc Fasteners | |
| Cadmium Fasteners |
| Component | Wt. % |
| Chromium | 20% |
| Nickel | 24% |
| Molybdenum | 6.30% |
| Nitrogen | 36 |
| Mn | 0.22% |
| Copper | .25% – .75% |
| PREN | 44.3 |
| Physical Properties | Value | Units | Comments |
| Density | 0.291 | lb/in3 g/cm3 | |
| 8.06 | |||
| Mechanical Properties | |||
| Modulus of Elasticity | 28.3 x 106195 | psiGPa | |
| Melting Range | 2410 to 2550 | ºF | |
| Coefficient of Expansion | 8.5 | 10-6/ °F | |
| 68 to 212 °F | 15.3 | 10-6/ °C | |
| 20 to 100 °C | |||
| Modulus of Elasticity | 193 GPa | 28000 ksi | In Tension |
| Sealing Temperature | 1885 | °F | |
| 1030 | °C | ||
| Electrical Properties | |||
| Electrical Resistivity | 535 | Ohm·circ mil/ft | |
| 0.89 | µOm | ||
| Magnetic Permeability | 1.0028 | Oersted | Fully annealed 0.5″ plate 65% cold-worked plate |
| 1.0028 | (µ at 200H) | ||
| Thermal Properties | |||
| Specific Heat Capacity | 0.11 | Btu/lb·°F | |
| 500 | J/kg·K | ||
| FASTENERS ASTM GRADES | |||
| AL6XN Nuts | AL6XN Hex Slotted Nuts |
| AL6XN Bolts | AL6XN Heavy Hex Nuts |
| AL6XN screws | AL6XN Heavy Hex Jam Nuts |
| AL6XN washers | AL6XN Heavy Hex Slotted Nuts |
| AL6XN Heavy Hex Bolts | AL6XN Hex Coupling Nuts |
| AL6XN Finished Hex Bolts | AL6XN Cap Nuts |
| AL6XN Oval Neck Track Bolts | AL6XN 12-Point Nuts |
| AL6XN Bent Bolts | AL6XN Flat Washers |
| AL6XN Hex Cap Screws | AL6XN Lock Washers |
| AL6XN Heavy Hex Screws | AL6XN Beveled Washers |
| AL6XN 12-Point Screws | AL6XN Threaded Rod |
| AL6XN Socket Head Cap Screws | AL6XN Stud Bolts |
| AL6XN Socket Head Shoulder Screws | AL6XN Continuous Thread Studs |
| AL6XN Socket Set Screws | AL6XN Double End Studs |
| AL6XN Flat Countersunk Head Cap Screws | AL6XN Tap End Studs |
| AL6XN Hex Nuts | AL6XN Threaded Taper Pins |
| AL6XN Hex Jam Nuts | AL6XN Heavy Square Nuts |