Call Us: +91 9769058811 / 9892702393
[email protected]
NITRONIC 50 Threads: | METRIC, BSW, BSF, UNC, UNF or as required |
Standard: | DIN 933, DIN 931, ANSI, JIS standards |
NITRONIC 50 Fasteners In Form of: | Hex |
Square | |
Round | |
Threading as per Gauge Etc. | |
Head drive: | Phillips, Slotted, Phillips/Slot, Six-Lobe, etc |
NITRONIC 50 Packing: | IN BULK :canton/pallet, Small Boxs/carton/ pallet, or customer request |
NITRONIC 50 Test Certificate: | Manufacturer Test Certificate as per EN 10204 / 3.1 |
Property Class: | For Bolts & Screws: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
For Nuts: A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 | |
For SHCS: F837B, F837C, F837E, F837 | |
For Threaded Rods: A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 | |
NITRONIC 50 Finish: | Passivated |
NITRONIC 50 Origin and service-region: | European |
Origin of 304 Stainless Steel Nuts are Western European. However projects with eastern origin are possible on request. | |
Stainless Steel Grades: | AISI 304, AISI 304L, AISI 316, AISI 316L, AISI 309, AISI 310, AISI 317L, AISI 321, AISI 317, AISI 309, AISI 410, AISI 422, AISI 430, AISI 431, AISI 303 , AISI 202 fasteners Etc. |
Surface Coating: | Hot Dipped Galvanizing Fasteners |
Phosphate Fasteners | |
Teflon Fasteners | |
Ptfe Coated Fasteners | |
Xylon Fasteners | |
Zinc Fasteners | |
Cadmium Fasteners |
Carbon | 0.15 max |
Chromium | 16.5 – 19.5 |
Iron | Balance |
Manganese | 11 – 14 |
Nickel | 0.5 – 2.5 |
Nitrogen | 0.2 – 0.45 |
Phosphorus | 0.06 max |
Silicon | 1 max |
Sulphur | 0.03 max |
Properties | Metric |
Tensile strength | 690 MPa |
Yield strength | 379 MPa |
Elongation at break | 30% |
Rockwell B hardness | 92 |
Physical Properties | Value | Units | Comments |
Density | 0.291 | lb/in3 g/cm3 | |
8.06 | |||
Mechanical Properties | |||
Modulus of Elasticity | 28.3 x 106195 | psiGPa | |
Melting Range | 2410 to 2550 | ºF | |
Coefficient of Expansion | 8.5 | 10-6/ °F | |
68 to 212 °F | 15.3 | 10-6/ °C | |
20 to 100 °C | |||
Modulus of Elasticity | 193 GPa | 28000 ksi | In Tension |
Sealing Temperature | 1885 | °F | |
1030 | °C | ||
Electrical Properties | |||
Electrical Resistivity | 535 | Ohm·circ mil/ft | |
0.89 | µOm | ||
Magnetic Permeability | 1.0028 | Oersted | Fully annealed 0.5″ plate 65% cold-worked plate |
1.0028 | (µ at 200H) | ||
Thermal Properties | |||
Specific Heat Capacity | 0.11 | Btu/lb·°F | |
500 | J/kg·K | ||
FASTENERS ASTM GRADES |
NITRONIC 50 Nuts | NITRONIC 50 Hex Slotted Nuts |
NITRONIC 50 Bolts | NITRONIC 50 Heavy Hex Nuts |
NITRONIC 50 screws | NITRONIC 50 Heavy Hex Jam Nuts |
NITRONIC 50 washers | NITRONIC 50 Heavy Hex Slotted Nuts |
NITRONIC 50 Heavy Hex Bolts | NITRONIC 50 Hex Coupling Nuts |
NITRONIC 50 Finished Hex Bolts | NITRONIC 50 Cap Nuts |
NITRONIC 50 Oval Neck Track Bolts | NITRONIC 50 12-Point Nuts |
NITRONIC 50 Bent Bolts | NITRONIC 50 Flat Washers |
NITRONIC 50 Hex Cap Screws | NITRONIC 50 Lock Washers |
NITRONIC 50 Heavy Hex Screws | NITRONIC 50 Beveled Washers |
NITRONIC 50 12-Point Screws | NITRONIC 50 Threaded Rod |
NITRONIC 50 Socket Head Cap Screws | NITRONIC 50 Stud Bolts |
NITRONIC 50 Socket Head Shoulder Screws | NITRONIC 50 Continuous Thread Studs |
NITRONIC 50 Socket Set Screws | NITRONIC 50 Double End Studs |
NITRONIC 50 Flat Countersunk Head Cap Screws | NITRONIC 50 Tap End Studs |
NITRONIC 50 Hex Nuts | NITRONIC 50 Threaded Taper Pins |
NITRONIC 50 Hex Jam Nuts | NITRONIC 50 Heavy Square Nuts |