Manufacturer of widespread range 317 stainless steel bolts, 317 stainless-steel bolts available at competitive price

Well-known for 317 stainless-steel bolts, manufacturer and supplier of the most qualitative range of 317 stainless-steel bolts

Grand Metal Corporation is acknowledged as manufacturer, exporter & providers of 317 stainless-steel bolts, to be had in a variety or grades, substances, and finishes, in metric and inch sizes. Complete line fastener distributor that specialize in commercial products for corporations involved in equipment production, mining, oil refineries, chemical manufacturing, metal and aluminium manufacturing, utilities and transportation, and industrial production.

Stainless-steel fasteners are used significantly during enterprise for both original gadget manufacture in addition to for replacement. The stainless steel fastener materials are recognized as the b8 magnificence of alloys and are identified inside the astm specification a193/193m (widespread specification for alloy steel and stainless-steel bolting substances for high temperature carrier). The corresponding nut specification is astm specification a194/194m. incorporates a spread of 317 stainless steel bolts from carbon metallic, stainless steel and excessive nickel alloy -f467 nicu 400 (monel) and business 18-8/304, 317 stainless steel. We supply 317 stainless steel bolts at very competitive price.

Range of Stainless Steel Fasteners product 317 Stainless Steel Bolts, Hexagon head bolt, Hexagon head screw, Round head square neck bolt, Hexagon socket head cap screw in full thread and half thread, Hexagon wood screw, Hexagon socket button head screw, Hexagon socket button flange screw, Hexagon socket counter sunk head cap screw in full thread and half thread, square nuts, square weld nuts, hexagon weld nuts, thick nyloc nuts, hexagon flange nuts, threaded rods, dowel screws and many more. These products are availed as per Indian and international standards.

Type 317L is a higher carbon variant of 317 making the steel more suitable for use in applications where elevated temperatures are present. Stabilised Grade 317Ti offers similar qualities.

The increased carbon content delivers a greater tensile and yield strength. The austenitic structure of the material also gives this grade excellent toughness, even down to cryogenic temperatures.

• Increased carbon content heat resistant qualities
• Greater tensile yield strength
• Greater short and long term creep strength

317 is a molybdenum bearing, low carbon content "l" grade austenitic stainless steel that provides improved corrosion resistance over 304 and 317 stainless steels. the low carbon provides resistance to sensitization during welding and other thermal processes. 317 is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.

Corrosion Resistance
317 has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 317 stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317 is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°f (49°c). at temperatures under 100°f (38°c) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behaviour. in processes where condensation of sulfur-bearing gases occurs, 317 is much more resistant to attack at the point of condensation than conventional alloy 317. the acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.

317 is readily welded by a full range of conventional welding procedures (except oxyacetylene). aws e317l/er317l filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317 should be used to weld 317 steel.